Skip to content

FD&C Yellow No. 6

FD&C Yellow No. 6 suppliers and sourcing guide

FD&C Yellow No. 6 (Sunset Yellow FCF) is a synthetic, water-soluble orange-yellow azo dye, principally a disodium salt made by diazotizing sulfanilic acid and coupling it with a hydroxynaphthalene sulfonic acid. The dye is isolated as the sodium salt and dried. Every batch must be certified by FDA before sale. It is sold as straight dye powder and granules, liquid solutions, and as aluminum lakes for coatings and dry products.

Category
Colors
Also known as
Sunset Yellow FCF · Yellow 6 · E110 · CI 15985
Facts checked
November 2026

Forms and grades of fd&c yellow no. 6

Suppliers sell different products under the same name. Specify the one you need.

  • Straight color powder

    Spray-dried or granular FD&C Yellow No. 6 with a stated total (pure) dye content, dissolved in water or syrup before use.

  • Granular or dust-reduced

    Agglomerated grades that make less airborne dust in the weigh room and dissolve without clumping.

  • Liquid solution

    Ready-to-dose water or glycol solutions at a stated dye percentage, often preserved, for beverage and syrup plants.

  • Aluminum lake

    The dye laked onto alumina so it disperses rather than dissolves, used in tablet coatings, fat-based coatings and dry mixes.

  • Blends

    Pre-mixed shades combining several certified colors, each of which must come from a certified batch.

What to check on the COA

Compare each result with your own specification when the lot arrives.

FDA certification lot number
Every batch of FD&C Yellow No. 6 must carry an FDA certification lot number; check that the number on the COA and the drum match.
Total color (pure dye)
Total color content, by spectrophotometry or titration, against the minimum in the 21 CFR part 74 specification; it sets how much dye each kilogram delivers.
Volatile matter, chlorides and sulfates
Sum of moisture (loss at 135 °C) and salts, which make up most of the non-dye portion of a straight color.
Subsidiary colors and intermediates
Subsidiary colors and unreacted intermediates by HPLC, each against its regulatory limit.
Heavy metals
Lead, arsenic and mercury by ICP-MS, reported against the limits in the color additive regulation and the supplier specification.
Water-insoluble matter
Insoluble residue after dissolving, which shows up as specks or haze in clear beverages.

Storage, lots and expiry

Storage and shelf life

Store in the original sealed containers in a cool, dry place away from light; powders are hygroscopic and cake in humid rooms, and dust should be controlled because small amounts stain other products. Shelf life is set by the supplier, and certified colors are generally retested for total color and appearance once past the supplier retest date. Keep each container's FDA certification lot number with the stock so it can be traced into finished batches.

Lots and expiry dates

Record the FDA certification lot number and the actual total color of each lot of FD&C Yellow No. 6, and adjust dosing when the dye content differs from the previous lot. Compare shade against a retained standard in the finished product, since small subsidiary-color differences can shift hue.

Regulatory status

Facts from regulators and standards bodies, each linked to its source.

This is general information, not regulatory advice. Status differs by country and by how the ingredient is used, so check the rules for your product and market.

FD&C Yellow No. 6 suppliers

Manufacturers and distributors whose own websites say they sell it.

  • Sensient Colors

    Manufacturer · St. Louis, MO

    North American food color business of Sensient Technologies, making certified FD&C dyes and lakes alongside natural colors from sources such as beet juice, carmine, annatto, spirulina and butterfly pea flower.

Suppliers are in alphabetical order and none pays to appear. Each claim is checked against the supplier’s own website on the date shown. Ask for the specification sheet and a recent COA before you order, and confirm details with the supplier.

Frequently asked questions

What forms of fd&c yellow no. 6 can brands buy?

Common forms include straight color powder, granular or dust-reduced, liquid solution, aluminum lake and blends. Ask each supplier for the specification sheet of the exact grade they quote.

What should the COA for fd&c yellow no. 6 include?

Expect fDA certification lot number, total color (pure dye), volatile matter, chlorides and sulfates, subsidiary colors and intermediates, heavy metals and water-insoluble matter, each with its method, specification and result for that lot.

How should fd&c yellow no. 6 be stored?

Store in the original sealed containers in a cool, dry place away from light; powders are hygroscopic and cake in humid rooms, and dust should be controlled because small amounts stain other products. Shelf life is set by the supplier, and certified colors are generally retested for total color and appearance once past the supplier retest date. Keep each container's FDA certification lot number with the stock so it can be traced into finished batches.

What is the regulatory status of fd&c yellow no. 6?

21 CFR 74.706 lists FD&C Yellow No. 6 for coloring foods, including dietary supplements, generally at current good manufacturing practice levels. 21 CFR 74.706 requires every batch of FD&C Yellow No. 6 to be certified by FDA. FDA's April 22, 2025 news release lists FD&C Yellow No. 6 among six synthetic dyes FDA is working with industry to eliminate from the food supply by the end of the following year. Health Canada's List of Permitted Colouring Agents includes Sunset Yellow FCF (item S.6).

Sell ingredients to brands?

Request a free listing for the ingredients you make or distribute. No paid placement.

Request a listing