Skip to content

D&C Red No. 27

D&C Red No. 27 suppliers and sourcing guide

D&C Red No. 27 is a synthetic bluish-red fluorescein color, principally 2',4',5',7'-tetrabromo-4,5,6,7-tetrachlorofluorescein. It is made by condensing resorcinol with tetrachlorophthalic acid or its anhydride and then brominating the product. It is a certified color for drugs and cosmetics, not food, and is used mostly as an aluminum lake in lipsticks, blushes and nail products.

Category
Colors
Also known as
Tetrabromotetrachlorofluorescein · CAS 13473-26-2 · D&C Red 27 Aluminum Lake
Facts checked
November 2026

Forms and grades of d&c red no. 27

Suppliers sell different products under the same name. Specify the one you need.

  • Straight color

    The non-salt form of the dye as a powder at a stated total color content, used where a solvent- or oil-dispersible straight color is wanted.

  • Aluminum lake

    The dye laked onto alumina so it disperses rather than dissolves; the most common form in lip and face color.

  • Pigment dispersions

    Lakes pre-ground in castor oil or other carriers for lipstick and nail polish production.

  • Pre-mixed shades

    Blends with other certified and exempt colors, each component from a certified lot.

What to check on the COA

Compare each result with your own specification when the lot arrives.

FDA certification lot number
Every batch of D&C Red No. 27 must carry an FDA certification lot number; check that the number on the COA, the certificate and the container match.
Total color
Pure dye content by spectrophotometry or titration against the 21 CFR part 74 minimum (not less than 90 percent); it sets how much color each kilogram delivers.
Volatile matter and salts
Volatile matter at 135 °C plus chlorides and sulfates (as sodium salts), which make up most of the non-dye portion of a straight color.
Intermediates and subsidiary colors
Tetrachlorophthalic acid, brominated resorcinol, the ethyl ester and lower halogenated subsidiary colors by HPLC, each against its limit in 21 CFR 74.1327.
Heavy metals
Lead, arsenic and mercury by ICP-MS or AAS, reported against the limits in the color additive regulation and the supplier specification.
Shade and strength vs. standard
Hue and color strength compared with the supplier's retained standard, by drawdown or spectrophotometer, to catch shade drift between lots.

Storage, lots and expiry

Storage and shelf life

Store in the original sealed containers in a cool, dry place away from light and heat; powders cake in humid rooms, and dust should be controlled because small amounts stain other products and equipment. Shelf life is set by the supplier, with total color and appearance retested once past the retest date. Keep each container's FDA certification lot number with the stock so it can be traced into finished batches.

Lots and expiry dates

Record the FDA certification lot number and total color of each lot of D&C Red No. 27, and adjust dosing when dye content differs from the previous lot. Compare shade against a retained standard in the finished product, since subsidiary-color and particle-size differences can shift hue.

Regulatory status

Facts from regulators and standards bodies, each linked to its source.

This is general information, not regulatory advice. Status differs by country and by how the ingredient is used, so check the rules for your product and market.

D&C Red No. 27 suppliers

Manufacturers and distributors whose own websites say they sell it.

We are checking d&c red no. 27 suppliers now

Every listing is checked against the supplier’s own website before it goes live, so this list fills in over the coming weeks. The specs and COA checklist above are ready today.

Sell d&c red no. 27? Request a listing

Frequently asked questions

What forms of d&c red no. 27 can brands buy?

Common forms include straight color, aluminum lake, pigment dispersions and pre-mixed shades. Ask each supplier for the specification sheet of the exact grade they quote.

What should the COA for d&c red no. 27 include?

Expect fDA certification lot number, total color, volatile matter and salts, intermediates and subsidiary colors, heavy metals and shade and strength vs. standard, each with its method, specification and result for that lot.

How should d&c red no. 27 be stored?

Store in the original sealed containers in a cool, dry place away from light and heat; powders cake in humid rooms, and dust should be controlled because small amounts stain other products and equipment. Shelf life is set by the supplier, with total color and appearance retested once past the retest date. Keep each container's FDA certification lot number with the stock so it can be traced into finished batches.

What is the regulatory status of d&c red no. 27?

21 CFR 74.1327 permits D&C Red No. 27 for coloring drugs generally in amounts consistent with good manufacturing practice. 21 CFR 74.2327 permits D&C Red No. 27 for coloring cosmetics generally. All batches of D&C Red No. 27 must be certified by FDA under 21 CFR part 80. The 21 CFR 74.1327 specification requires total color of not less than 90 percent and lead of not more than 20 ppm.

Sell ingredients to brands?

Request a free listing for the ingredients you make or distribute. No paid placement.

Request a listing